DAN7600 Series Polymeric Foam Tape
Medium density closed cell polymeric foam
Applications:
- Revolutionary in composition, this product competes favourably with high end rubbers such as EPDM, Nitrile, SBR and depending on application, high density urethane foams
- Specially designed for use where sophisticated industrial, automotive, medical and construction applications
- Suitable for use where excellent dimensional stability, cushioning properties or vibration dampening properties are required
Properties:
- No out-gassing at ambient temperature
- Does not go brittle or exhibit loss of properties over time and wide temperature ranges
- No plasticiser migration
- Maintains physical properties under various sterilisation conditions
- Totally unaffected by harsh chemicals such as petrol, oil, hydraulic or brake fluid, alcohol, antifreeze and most acids
- Resistant to fire, UV, fungi, weather and oxidation
Thicknesses:
- 1.6mm / 3.2mm / 4.8mm / 6.4mm / 9.5mm / 12.7mm
Storage:
- Cartons should be sealed and stored away from direct sunlight at temperatures between 15°C to 30°C
Technical specifications:
- Backing material: Medium density closed cell polymeric foam
- Adhesive Type: Acrylic
- Density: 240 kg/m3
- Tensile Strength (ASTM D412): 620 kPa
- Elongation (ASTM D412): 260%
- Hardness - Shore 00 (ASTM D2240): 35
- Compression Deflection @ 25% (ASTM D1056): 41 kPa
- Compression Set @ 50% (ASTM D1056): 12% loss from original height
- Water Absorption: 1.2%
- Thermal Conductivity (K factor)(ASTM C518): 0.043 W/m K
- Service Temperature: -40°C to +105°C
- Application Temperature: +10°C to +43°C
- Colour Available: Black
Holding New Zealand together since 1962
www.danco.co.nz